JEMS EndNote Style
Manuscript Template (.doc)
Sample Articles
Declaration form
Policies and Publication Ethics

Submit_article-Scienceline

Instructions for Authors


Manuscript as Original Research Paper, Review and Short Communication are invited for rapid peer-review publishing in the Journal of Educational and Management Studies. Considered subject areas include: Educational Psychology, Social Studies, School and Pre-school Education, Philosophy of Education, Exceptional Children Studies,  School Counseling, Family Counseling, Women Studies,  Cognitive Studies, Learning Studies, Cultural Studies and Anthropology  Management Studies: Educational Management, Curriculum,  Executive Management, Strategic Management, Organizational climate, Health Management, Governmental Management, Crisis Management, Change Mmanagement, Financial Management, Ethics in Management, Educational Technology


Submission
The manuscript and other correspondence should preferentially be submit online.
Please embed all figures and tables in the manuscript to become one single file for submission. Once submission is complete, the system will generate a manuscript ID and will send an email regarding your submission. Meanwhile, the authors can submit or track articles via  This e-mail address is being protected from spambots. You need JavaScript enabled to view it or This e-mail address is being protected from spambots. You need JavaScript enabled to view it .


Supplementary information:
The online submission form allows supplementary information to be submitted together with the main manuscript file and covering letter. If you have more than one supplementary files, you can submit the extra ones by email after the initial submission. Author guidelines are specific for each journal. Our Word template can assist you by modifying your page layout, text formatting, headings, title page, image placement, and citations/references such that they agree with the guidelines of journal. If you believe your article is fully edited per journal style, please use our MS Word template before submission. Supplementary materials may include figures, tables, methods, videos, and other materials. They are available online linked to the original published article. Supplementary tables and figures should be labeled with a "S", e.g. "Table S1" and "Figure S1". The maximum file size for supplementary materials is 10MB each. Please keep the files as small possible to avoid the frustrations experienced by readers with downloading large files.


Submission to the Journal is on the understanding that:
1.The article has not been previously published in any other form and is not under consideration for publication elsewhere;
2.All authors have approved the submission and have obtained permission for publish work.


alt


Presentation of the article

Main Format
First page of the manuscripts must be properly identified by the title and the name(s) of the author(s). It should be typed in Times New Roman or Zilla Slab (font sizes: 17pt for the title, 10pt for the section headings in the body of the text and the main text, double spaced, in A4 format with 2cm margins (both doc./docx formats). All pages and lines of the main text should be numbered consecutively throughout the manuscript. Abbreviations in the article title are not allowed. Manuscripts should be arranged in the following order:

1. TITLE (brief, attractive and targeted);
2. Name(s) and Affiliation(s) of author(s) (including post code or corresponding Email);
3. ABSTRACT;
4. Key words (separate by comma,);
5. Abbreviations (those used throughout the manuscript);
6. INTRODUCTION (clear statement of the problem, the relevant literature on the subject, and the proposed approach or solution);
7. METHODOLOGY (should be complete enough to allow experiments to be reproduced);
8. RESULTS;
9. DISCUSSION;
10. CONCLUSION;
11. DECLARATIONS (Acknowledgements, Consent to publish, Competing interests, Authors' contributions, and Availability of data etc.)
12. REFERENCES;
13. Tables;
14. Figures;
15. Graphs

Results and Discussion can be presented jointly.
Discussion and Conclusion can be presented jointly.

Article Sections Format

Title should be a brief phrase describing the contents of the paper. The first letter of each word in title should use upper case. The Title Page should include the author(s)'s full names and affiliations, the name of the corresponding author along with phone and e-mail information. Present address (es) of author(s) should appear as a footnote.

Abstract should be informative and completely self-explanatory, briefly present the topic, state the scope of the experiments, indicate significant data, and point out major findings and conclusions. The abstract should be 150 to 300 words in length. Complete sentences, active verbs, and the third person should be used, and the abstract should be written in the past tense. Standard nomenclature should be used and abbreviations should be avoided. No literature should be cited.

Following the abstract, about 3 to 8 key words that will provide indexing references should be listed.

Introduction should provide a clear statement of the problem, the relevant literature on the subject, and the proposed approach or solution. It should be understandable to colleagues from a broad range of scientific disciplines.

Methodology should be complete enough to allow experiments to be reproduced. However, only truly new procedures should be described in detail; previously published procedures should be cited, and important modifications of published procedures should be mentioned briefly.

Results should be presented with clarity and precision. The results should be written in the past tense when describing findings in the author(s)'s experiments. Previously published findings should be written in the past tense. Results should be explained, but largely without referring to the literature

Discussion should interpret the findings in view of the results obtained in this and in past studies on this topic. The Results and Discussion sections can include subheadings, and when appropriate, both sections can be combined.

Conclusion should be brief and tight about the importance of the work or suggest the potential applications and extensions. State the conclusions in a few sentences at the end of the paper. This section should not be similar to the Abstract content.

Declarations including Acknowledgements, Author contribution, Competing interests, Consent to publish, and Availability of data etc.

Tables should be kept to a minimum and be designed to be as simple as possible. Tables are to be typed double-spaced throughout, including headings and footnotes. Each table should be on a separate page, numbered consecutively in Arabic numerals and supplied with a heading and a legend. Tables should be self-explanatory without reference to the text. The details of the methods used in the experiments should preferably be described in the legend instead of in the text. The same data should not be presented in both table and graph forms or repeated in the text.

Figure legends should be typed in numerical order on a separate sheet. Graphics should be prepared using applications capable of generating high resolution GIF, TIFF, JPEG or PowerPoint before pasting in the Microsoft Word manuscript file. Use Arabic numerals to designate figures and upper case letters for their parts (Figure 1). Begin each legend with a title and include sufficient description so that the figure is understandable without reading the text of the manuscript. Information given in legends should not be repeated in the text.


Declarations

Please ensure that the sections: Ethics (and consent to participate, if any), Acknowledgements, Author contribution, Competing interests, Consent to publish, Availability of data and materials are included at the end of your manuscript in a Declarations section.

Acknowledgements
We encourage authors to include an Acknowledgements section. Please acknowledge anyone who contributed towards the study by making substantial contributions to conception, design, acquisition of data, or analysis and interpretation of data, or who was involved in drafting the manuscript or revising it critically for important intellectual content, but who does not meet the criteria for authorship. Please also include their source(s) of funding. Please also acknowledge anyone who contributed materials essential for the study. Authors should obtain permission to acknowledge from all those mentioned in the Acknowledgements. Please list the source(s) of funding for the study, for each author, and for the manuscript preparation in the acknowledgements section. Authors must describe the role of the funding body, if any, in study design; in the collection, analysis, and interpretation of data; in the writing of the manuscript; and in the decision to submit the manuscript for publication.

Author contribution
For manuscripts with more than one author, JEMS require an Author Contributions section to be placed after the Acknowledgements section. An 'author' is generally considered to be someone who has made substantive intellectual contributions to a published study. To qualify as an author one should 1) have made substantial contributions to conception and design, or acquisition of data, or analysis and interpretation of data; 2) have been involved in drafting the manuscript or revising it critically for important intellectual content; and 3) have given final approval of the version to be published. Each author should have participated sufficiently in the work to take public responsibility for appropriate portions of the content. Acquisition of funding, collection of data, or general supervision of the research group, alone, does not justify authorship.
We suggest the following format/example (please use initials to refer to each author's contribution): AB carried out the molecular genetic studies, participated in the sequence alignment and drafted the manuscript. JY carried out the immunoassays. MT participated in the sequence alignment. ES participated in the design of the study and performed the statistical analysis. FG conceived of the study, and participated in its design and coordination and helped to draft the manuscript. All authors read and approved the final manuscript.
For authors that equally participated in a study please write 'All/Both authors contributed equally to this work.' Contributors who do not meet the criteria for authorship should be listed in an acknowledgements section.

Competing interests
Competing interests that might interfere with the objective presentation of the research findings contained in the manuscript should be declared in a paragraph heading "Competing interests" (after Acknowledgment or Author Contribution sections). Examples of competing interests are ownership of stock in a company, commercial grants, board membership, etc. If there is no competing interest, please use the statement "The authors declare that they have no competing interests.".

Consent to publish
Please include a ‘Consent for publication section in your manuscript. If your manuscript contains any individual person’s data in any form (including individual details, images or videos), consent to publish must be obtained from that person, or in the case of children, their parent or legal guardian. All presentations of case reports must have consent to publish. You can use your institutional consent form or our consent form if you prefer. You should not send the form to us on submission, but we may request to see a copy at any stage (including after publication). If your manuscript does not contain any individual persons data, please state “Not applicable” in this section.

Change in authorship
We do not allow any change in authorship after provisional acceptance. We cannot allow any addition, deletion or change in sequence of author name. We have this policy to prevent the fraud.


alt

REFERENCES

A JEMS reference style for EndNote may be found here.

  1. All references to publications made in the text should be presented in a list with their full bibliographical description.
  2. In the text, a reference identified by means of an author‘s name should be followed by the date of the reference in parentheses. When there are more than two authors, only the first author‘s surname should be mentioned, followed by ’et al‘. In the event that an author cited has had two or more works published during the same year, the reference, both in the text and in the reference list, should be identified by a lower case letter like ’a‘ and ’b‘ after the date to distinguish the works.
  3. References in the text should be arranged chronologically (e.g. Kelebeni, 1983; Usman and Smith, 1992 and Agindotan et al., 2013). 'et al.' should not be italic. The list of references should be arranged alphabetically on author's surnames, and chronologically per author. If an author's name in the list is also mentioned with co-authors, the following order should be used: Publications of the single author, arranged according to publication dates - publications of the same author with one co-author - publications of the author with more than one co-author. Publications by the same author(s) in the same year should be listed as 1992a, l992b,etc.
  4. Names of authors and title of journals, published in non-latin alphabets should be transliterated in English.
  5. A sample of standard reference is "1th Author surname, A., 2th Author surname, B. and 3th Author surname, C. (2013). Article title should be regular, in sentence case form, and 9 pt. Journal of Educational and Management Studies, Volume No. (Issue No.): 00-00."  (Journal titles should be full and not italic.)
  6. If available please add DOI numbers or the link of articles at the end of each reference.

Examples (at the text)
Abayomi (2000), Agindotan et al. (2003), (Kelebeni, 1983), (Usman and Smith, 1992), (Chege, 1998; Chukwura, 1987a,b; Tijani, 1993,1995), (Kumasi et al., 2001).

Examples (at References section)
a) For journal

Wentzel, K.R. and Watkins, D.E. (2002). Peer relationships and Collaborative learning as Contexts for academic enablers. School Psychology Review, 31: 366-377. DOI: https://doi.org/10.1080/02796015.2002.12086161, Google Scholar

Shan, J. and Jolly, D. (2015). Technological innovation capabilities, product strategy, and firm performance: The electronics industry in China. Canadian Journal of Administrative Sciences, 30 (3), 159-172. https://doi.org/10.1002/cjas.1256,    Google Scholar

Chi N.T.K., Tuan N.V., and Dat N.M. (2019). The use of importance-performance analysis (IPA) in evaluating key attributes of Vietnam’s universities. J. Educ. Manage. Stud., 9(3): 21-25. DOI: https://dx.doi.org/10.29252/scil.2019.jems4

Zott, C., Amit, R., and Massa, L. (2011). The business model: recent developments and future research. Journal of Management, 37 (4), 1019-1042. https://doi.org/10.1177/0149206311406265, Google Scholar

b) For symposia reports and conference
Goodenow, C. (1991). The sense of belonging and its relationship to academic motivation among pre-and early adolescent students. Paper presented at the annual conference of the American Educational Research Association, Chicago, IL (ERIC Document Reproduction Service No. ED 151-351). Link, DOI

c) For books
Juvonen, J. (2006). Sense of belonging, social bonds, and school functioning. In p. Alexander, & P. Winn (Eds.), Handbook of Educational Psychology, Second ed. Macmillan, New York, p. 655-674. Link, DOI

Malott, R.W., & Suarez, E.T. (2004). "Principles of behavior", Upper Saddle River, NJ: Pearson. Link, DOI

d) For website
Shaughnessy, M.F. (1991). hwww.itari.in/categories/Creativity/17.a157568.

In referring to a personal communication the two words are followed by the year, e.g. (Brown, J. M., personal communication, 1982). In this case initials are given in the text. Where available, URLs for the references should be provided.

Formulae, numbers and symbols

  1. Typewritten formulae are preferred. Subscripts and superscripts are important. Check disparities between zero (0) and the letter 0, and between one (1) and the letter I.
  2. Describe all symbols immediately after the equation in which they are first used.
  3. For simple fractions, use the solidus (/), e.g. 10 /38.
  4. Equations should be presented into parentheses on the right-hand side, in tandem.
  5. Levels of statistical significance which can be used without further explanations are *P < 0.05, **P < 0.01, and ***P<0.001.
  6. In the English articles, a decimal point should be used instead of a decimal comma.
  7. Use Symbol fonts for "±"; "≤" and "≥" (avoid underline).
  8. In chemical formulae, valence of ions should be given, e.g. Ca2+ and CO32-, not as Ca++ or CO3.
  9. Numbers up to 10 should be written in the text by words. Numbers above 1000 are recommended to be given as 10 powered x.
  10. Greek letters should be explained in the margins with their names as follows: Αα - alpha, Ββ - beta, Γγ - gamma, Δδ - delta, Εε - epsilon, Ζζ - zeta, Ηη - eta, Θθ - theta, Ιι - iota, Κκ - kappa, Λλ - lambda, Μμ - mu, Νν - nu, Ξξ - xi, Οο - omicron, Ππ - pi, Ρρ - rho, Σσ - sigma, Ττ - tau, Υυ - ipsilon, Φφ - phi, Χχ - chi, Ψψ - psi, Ωω - omega. Please avoid using math equations in Word whenever possible, as they have to be replaced by images in xml full text.

Abbreviations
Abbreviations should be presented in one paragraph, in the format: "term: definition". Please separate the items by ";".
E.g. ANN: artificial neural network; CFS: closed form solution; ...

alt

Review/Decisions/Processing/Policy

Firstly, all manuscripts will be checked by one of the plagiarism finding tools (iThenticatePlagScan and or Docol©c). A double-blind reviewing model is used by JEMS for non-plagiarized papers. The manuscript is edited and reviewed by the English language editor and at least 2 reviewers (1 external and 1 internal) selected by section editor of JEMS respectively. Also, a reviewer result form is filled by reviewer to guide authors. Possible decisions are: accept as is, minor revision, major revision, or reject. See sample of evaluation form. Authors should submit back their revisions within 14 days in the case of minor revision, or 30 days in the case of major revision.

To submit a revision please click here, fill out the form, and mark "Revised", mention the article code (for example JEMS-1108), attach the revision (MS word) and continue submission. After review and editing the article, a final formatted proof is sent to the corresponding author once again to apply all suggested corrections during the article process. The editor who received the final revisions from the corresponding authors shall not be hold responsible for any mistakes shown in the final publication. Manuscripts with significant results are typically reviewed and published at the highest priority.

Plagiarism
There is a zero-tolerance policy towards plagiarism (including self-plagiarism) in our journals. Manuscripts are screened for plagiarism by one of the plagiarism finding tools (iThenticatePlagScan and or Docol©c), before or during publication, and if found they will be rejected at any stage of processing. See sample of Docol©c-Report.

Declaration
After manuscript accepted for publication, a declaration form will be sent to the corresponding author who that is responsible to coauthors' agreements to publication of submitted work in JEMS after any amendments arising from the peer review.

Date of issue

The journal will be issued on 25th of March, June, September and December, each year.

Publication charges
There are no any submission, peer-reviewing and publication charges. The journal may charge the articles with more than 4000 words that need additional language and scientific editing services.



The Waiver policy
The publication fee will be waived for invited authors, authors of hot papers, and corresponding authors who are editorial board members of the Journal of Educational and Management Studies (JEMS). The Journal will consider requests to waive the fee for cases of financial hardship (for high quality manuscripts and upon acceptance for publication). Requests for waiver of the submission fee must be submitted via individual cover letter by the corresponding author and cosigned by an appropriate institutional official to verify that no institutional or grant funds are available for the payment of the fee. Letters including the manuscript title and manuscript ID number should be sent to: This e-mail address is being protected from spambots. You need JavaScript enabled to view it or This e-mail address is being protected from spambots. You need JavaScript enabled to view it . It is expected that waiver requests will be processed and authors will be notified within two business day.

The OA policy
The Journal of Educational and Management Studies (JEMS) is an open access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles, or use them for any other lawful purpose, without asking prior permission from the publisher or the author. This is in accordance with the BOAI definition of Open Access.


.


Paper Submission Flow

Paper_Submission_Flow_001Submission Preparation Checklist

Authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to the following guidelines.
The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
The submission file is in Microsoft Word, RTF, or PDF document file format.
Where available, URLs for the references have been provided.
The text is single-spaced; uses a 12-point font; and all illustrations, figures, and tables are placed within the text at the appropriate points, rather than at the end.
The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines.


 

(Revised on 30 March 2020)

 

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.